VGEM000-GB192
VGE International B.V.
●
Ekkersrijt 4304
●
5692 DH Son Netherlands
●
+31 499 461099
●
info@vgebv.nl
●
www.vgebv.nl Pag. 13/68
Installation & User Manual
1.7 Icons
This manual contains several comments with warnings that are marked with icons. Below the explanation of
the icons used.
Immediate danger to body and limbs. If the situation is not handled
correctly, there is a risk of death and/or personal injury. Damage to the
UV system can occur if the instructions are not properly followed.
Electrical danger.
Ensure that all metal parts of the VGE Pro UV installation are properly
grounded, in accordance with local guidelines and laws. Before carrying
out repairs or service work on the UV system, switch off the power at
the main switch or remove the plug from the socket.
Ensure proper grounding of the relevant metal parts in accordance with
local guidelines and laws.
Exposure to UV radiation (also short-term) can cause damage to the
skin and eyes. Avoid contact with direct and indirect UV radiation. Wear
protective, all-covering UV radiation blocking clothing to protect the skin
and wear a UV radiation blocking face mask to protect the face and
eyes.
Risk of burns.
Parts of the UV system and the UV lamps remain warm for a certain
time after the system has been switched off. Wait long enough to touch
these parts to prevent burns.
These comments provide information to help you work on or with the UV
system.
Danger to the environment.
The UV lamps contain mercury. Defective lamps must be processed by
a chemical waste radiation point.
Wear UV-blocking face protection to prevent damage to eyes and skin.
To Next Page
Loading...