2.3 Environmental conditions
For the installation, commissioning and use of a VGE Pro UV system, the following points must be
observed and followed:
- protect against rain, direct sunlight and frost;
- do not use outside;
- the environment must be free of corrosive and/or explosive gases or gas mixes, steam, condensation,
dripping liquids, salt-containing air and dust;
- the ambient temperature must not be lower than +5 °C and higher than + 40 °C;
- the relative humidity must not exceed 95 % and must not be condensing;
- the UV system must not be exposed to shocks and vibrations;
- the UV system must not be exposed to magnetic and/or electrostatic fields and not to ionizing radiation;
- the fluid pressure in the irradiation chamber must not exceed the maximum pressure specified in the
technical specifications;
- the irradiation chamber must not be exposed to pressure surges of liquid (also known as water hammer);
- ensure that the environment of the UV system is clean and sufficiently lit.
To Next Page
Loading...