8.1 Who can perform which actions?
Trained and authorized technical personnel means:
- Service: personnel who have received training and / or instruction from VGE International B.V. or an
authorized service partner;
- Maintenance: VGE International B.V. service employee or technical staff trained and authorized by VGE
International B.V .;
- Electrical work: authorized and qualified electrician.
The following activities fall under operation:
- Operating the control.
The following activities fall under maintenance:
- Assembly UV-C system;
- Cleaning and / or replacing quartz glass;
- Replace UV lamp;
- General maintenance of the UV system;
- Exchange O-rings;
- Inspection work.
The following activities fall under Electro:
- All electrical work on the irradiation chamber and in the control.
8.2 Maintenance schedule
The maintenance schedule specified below can be used in regular processes. Based on the application, the
interval period of inspection, cleaning and / or replacement must be increased or decreased.
It is important that a responsible person and a user are designated and described.
Record all activity carried out on a UV system in the logbook of the relevant UV
system.
- Also perform the daily activities;
- Test the systems that are on standby by fully switching them on for at
least one hour with water flow.
Maintenance level 1 can be performed by operated personnel.
Maintenance level 2 must be performed by technical staff trained and authorized by VGE International B.V.
authorized service personnel.
To Next Page
Loading...