VIA Technologies P4MA PRO - Page 51

Chapter 3
3-16
parallel port to support both the ECP and EPP modes simultaneously.
Settings are:
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
ECP + EPP: Extended Capability Port + Enhanced Parallel Port
EPP Mode Select
Select the Enhance Parallel Port mode. Settings: EPP1.9 and EPP1.7.
ECP Mode Use DMA
ECP utilises a DMA channel. This field is only available if Parallel Port
Mode is set to “ECP”. Select DMA channel for ECP use. Settings: 1 and
3.
Game Port Address
Set I./O port address for onboard game port. Settings: Disabled, and 200.
Midi Port Address
Set I./O port address for onboard midi port. Settings: Disabled, 330, and 300 .
Midi Port IRQ
Set an IRQ for the onboard midi port. This field is only available if midi port is
not “Disabled”. Settings: 5 and 10.