VIA Technologies P4MA PRO - Page 55

Chapter 3
3-20
PS2KB Wakeup from suspend
Select which “Hot-Key” is used to wake-up the system from power saving mode.
Settings: Disabled, Ctrl+F1, Ctrl+F2, Ctrl+F3, Ctrl+F4, Ctrl+F5, Ctrl+F6,
Ctrl+F7, Ctrl+F8, Ctrl+F9, Ctrl+F10, Ctrl+F11, Ctrl+F12, Power, Wake and
Any Key.
USB Resume
Decide whether or not the USB devices can wake the system from suspend state.
Settings: Disabled and Enabled.
PowerOn by PCI Card
Decide whether or not a PCI card can power up the system or resume it from
suspend state. Such PCI cards include LAN, onboard USB ports, etc. Settings:
Disabled and Enabled.
Modem Ring Resume
Decide whether or not Ring-In signals from Modem can wake up the system from
suspend state. Settings: Disabled and Enabled.
RTC Alarm Resume
The field is used to enable or disable the feature of booting up the system
on a scheduled time/date. Settings: Disabled and Enabled.
Date (of Month)
The field specifies the date for RTC Alarm Resume. Settings: 0~31.
Resume Time (hh:mm:ss)
The field specifies the time for RTC Alarm Resume. Format is <hour>
<minute><second>.