Viavi SmartClass OLP-87 - Page 76

76 OLP-87/OLP-87P
10 DATA MANAGEMENT
DATA MANAGEMENT OF PROBE AND PCM TESTS
Sorting test results
I The measurement data overview is displayed.
1. Press the
[A] key.
2. Tap t h e [More] button, then tap the [Sort Order] button.
3. Select the desired sorting order.
Show/hiding the overview columns
I The measurement data overview is displayed.
1. Press the [A] key.
2. Tap the [More] button, then tap the [Shown Columns] button.
3. Tap any column header to toggle its hide/show status.
Deleting stored results from a project
I The measurement data overview is displayed.
1. Select one, multiple or all tests.
2. Press the
[A] key.
3. Tap t h e [Delete Selected] button.
The selected test results are deleted.
Actions when viewing images
To toggle the image magnification low/high
J Press the [A] key, then tap the [Mag.] button.
– or –
Tap the image.
To move the image to the area of interest:
J Sweep the high magnification image with your finger.
– or –