EasyManua.ls Logo

Vicon Extra 828T PRO - Load Capacity

Vicon Extra 828T PRO
172 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
12
Only connect hydraulics when the system is not pressurised
You should only connect the hydraulic hoses to the tractor's hydraulics
when the hydraulic system on both tractor and machine is
depressurised.
There is a risk that the machine will move unintentionally.
Unintentional movement of the machine may result in serious injuries.
The hydraulic system should be checked regularly
All hoses and fittings should be checked regularly for visual damage.
Hydraulic hoses also age without visual damage.
Defect hydraulic hoses can result in personal injury or fire.
Colour marking of the hydraulic connections
The hydraulic connections between the tractor and the machine must
be colour marked.
By colour marking the hydraulic connections you avoid wrong
operation of the machine.
Incorrect operation or unintentional movement of the machine may
result in serious injuries.
Load capacity
Comply with total weight, axle pressure, the carrying capacity of
the tyres, and minimum weight
Neither the tractor's total weight, axle pressure or the carrying capacity
of the tyres may be exceeded with front mounted and rear mounted
machines.
To ensure the manoeuvrability of the tractor, the load on the front axle
must be minimum 20% of the tractors own weight.
Transgression can result in uncontrolled driving and accidents.
Be attentive when working around the P.T.O shaft
When working on the PTO shaft, the tractor PTO outlet must be
disconnected, the tractor must be stopped and the ignition key
removed.
This prevents the PTO shaft from suddenly starting to rotate.
If the tractor and the PTO shaft have not been connected in
accordance with the instructions, serious accidents causing damage
to limbs can occur.
Weight/power ratio between machine and tractor
The machine may only be connected to a tractor of the correct size
and performance.
The tractor's size and P.T.O outlet must correspond to the power
consumption of the machine and its weight.
Wrong weight/power ratio can result in damages on both machine and
tractor.
95-009
fr
95-006-2 fr
95-006-1 fr
95-006-3 fr
kg
HP/kW

Table of Contents

Related product manuals