Assembly - attachment
41
Friction clutch
Safety in connection with maintenance work on the machine
When working on the machine the tractor must be stopped and
secured.
This prevents the PTO shaft from suddenly starting to rotate.
If the tractor and the PTO shaft have not been connected in
accordance with the instructions serious accidents causing damage to
limbs can occur.
When working on the machine:
• The tractor engine must be stopped.
• The ignition key must be removed.
• The tractor's P.T.O. disconnected.
• The tractor hydraulic system must be disconnected.
• The hand brake should be activated.
Only carried out when
staring for the first time
The friction clutch is bled in the following way:
T model
Open the guard and use a suitable tool to remove the lock on the
friction clutch.
Pull the PTO shaft back, free of the drawbar.
Tighten all bolts on the friction clutch.
Fit and tighten the PTO shaft fully on the drawbar.
To Next Page
Loading...
