Operation
54
Check that the mechanical safety valve is open.
Carefully connect the tractor's PTO shaft.
Carefully increase the speed of the PTO shaft to 540/1000 RPM.
»Number of revolutions on the PTO« page 30
Use the tractor's machine handle to operate the hydraulic
functions.
In case there is no function on the machine:
Stop the tractor’s forward drive.
Stop the tractor.
Disconnect the PTO shaft immediately.
If the machine is too noisy or vibrates too much, stop the machine
immediately.
»Troubleshooting« page 164.
To Next Page
Loading...
