Vicon Extra 828T PRO - Page 84

Maintenance
84
Every 100 hours of
use
P.T.O. shaft
 Find the hole in the band and turn the P.T.O. shaft until the grease
nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
LT model
 Turn the P.T.O. shaft until the grease nipple is visible.
 Press the nozzle of the grease gun onto the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
 Find the hole in the band and turn the P.T.O. shaft until the grease
nipple is visible.
 Press the nozzle on the grease gun over the grease nipple.
 Pump 1, max. 2 times with the grease gun.
 »Maintenance intervals« page 79
 »Lubricants« page 170
58.237.000
58.237.000
58.237.000
58.237.000