Victron energy MultiPlus-II User Manual

Low battery alarm
The inverter has switched off due to low battery voltage. The "low
battery" LED is blinking.
Temperature pre-alarm
The internal temperature is reaching a critical level. The
"temperature" LED is blinking.
Temperature alarm
The inverter has switched off due it's internal temperature being too
high. The "temperature" LED is on.
Overload pre-alarm and low battery pre-alarm
The battery is nearly exhausted and the nominal output of the
inverter is exceeded. The "overload" and "low battery" LEDs are
both blinking alternately,
Ripple pre-alarm
The ripple voltage on the battery terminals is too high. The
"overload" and "low battery" LEDs are both blinking simultaneously.
Ripple alarm
The inverter has switched off due to excess ripple voltage on the
battery terminals. The "overload" and "low battery" LEDs are both
on.
MultiPlus-II 48V 3kVA 120V
Page 7 Operation

Victron energy MultiPlus-II Specifications

General

Model	MultiPlus-II
Inverter Power	3000 VA
Output Power	2400 W
Output Voltage	230 VAC
Output Frequency	50 Hz or 60 Hz
Charger Current	35 A
Efficiency	94%
Weight	18 kg
Input Voltage	230 VAC
Input Voltage Range	187-265 VAC
PowerControl and PowerAssist	Yes
Battery Voltage	48 V
Transfer Switch	50 A
Protection	Overload, Short Circuit, Over Temperature
Communication	VE.Bus, VE.Direct