Videocon Shine - User Manual

Questions and Answers

C
christian14Aug 2, 2025
Why is my Videocon Shine not agitating properly?
- R
  Renee FerrellAug 2, 2025
  If your Videocon Washer isn't agitating well, several factors could be the cause. First, ensure the power plug is correctly inserted. Other potential causes include a defective motor, timer, or gearbox, which would need replacement. Also, check for obstructions like clothes or objects stuck in the pulsator gap and remove them. A loose belt can also cause this issue, so adjust the belt tension. Finally, an overloaded wash load can hinder agitation, so remove some clothes.
L
lozanogeorgeAug 7, 2025
What to do if my Videocon Washer won't drain?
- D
  dannystevensAug 7, 2025
  If your Videocon Washer isn't draining, start by ensuring the drain hose is lowered. Lints accumulated in the drain hose can also cause this issue, so clean or replace the hose. Additionally, check if the cock rod A is broken or separated and replace or connect it. A defective DV bellow or a broken D.V-spring with insufficient elasticity could also be the problem; in such cases, adjust or replace the respective part. Finally, inspect the Guide-A.T for derailment or defects, and adjust or replace it as needed.
J
James HillAug 12, 2025
Why Videocon Washer is not spinning?
- T
  Trevor DanielAug 12, 2025
  If your Videocon Washer isn't spinning, first ensure that the lid is closed. An out-of-adjustment or defective safety switch can also prevent spinning, so adjust its fixing position or replace it. Lastly, a defective spin timer could be the cause, requiring a replacement.
C
Cody RodriguezAug 17, 2025
How to reduce excessive noise during spin in Videocon Washer?
- J
  John ThomasAug 17, 2025
  Excessive noise during spin in your Videocon Washer can be due to several reasons. First, ensure the machine is level and placed on a horizontal, stable floor. Loose screws fixing the motor can also cause noise, so fix them. Another cause could be clothes breaking into the gap between the tub and basket; if this occurs, remove the clothes.
B
Brandon SmithAug 22, 2025
What to do if there is excessive noise during agitation of Videocon Shine?
- B
  barbarasalazarAug 22, 2025
  If you notice excessive noise during agitation in your Videocon Washer, it could be due to a coin or button trapped between the pulsator and tub; remove any such objects. A defective bearing case can also cause this issue, requiring replacement. Alternatively, the pulley or transformer might be defectively fixed; adjust the pulley or replace it as necessary.
J
John TaylorAug 27, 2025
Why does the spinning basket on my Videocon Washer not stop?
- J
  Joseph FrankAug 27, 2025
  If the spinning basket on your Videocon Washer doesn't stop, it could be due to a worn-off or broken brake shoe, which would need replacement. Another potential cause is a brake arm that doesn't move, requiring replacement of the brake frame. Finally, a broken brake spring or one with insufficient elasticity can also cause this issue, so replace the brake spring.