What causes Videotec SM82A output video 2 to not switch?
Output 2 may have been set for control by VCR trigger. If you want it controlled by the keyboard, go to the ‘External triggers’ item and set Use VCR: No.
What causes a Videotec SM82A to have no buzzer when the alarm triggers?
If there is no buzzer when the alarm triggers, go to the Alarms menu and modify each individual alarm that is to trigger the Buzzer (item Enable Buzzer: YES). The same holds for the alarm relay (item Enable relay: YES).
Why is Videotec SM82A Power LED is off?
The power LED might be off because the power supply is absent. Make sure the jack from the power supply is properly inserted in its socket and that the power supply is properly inserted in the main outlet socket.
What to do if during OSM programming the lines are compressed and half the screen appears distorted on Videotec SM82A Matrix Switcher?
Some types of monitors have problems with non-interlaced video signals. Set Interlaced: YES in the menu. In any case this setting has no effect during normal matrix operation.
What to do if when viewing an input, the image is completely black or white, but the identification text appears on Videotec SM82A?
Try to adjust the camera iris until a clear image appears.
Lists the main features and technical capabilities of the matrix.
Details compatible keyboards, telemetry receivers, and multiplexers.
Steps to take before starting the installation process.
A visual guide showing how to connect the system components.
Specifies types and specifications for various cables used in installation.
Procedures for safely powering the matrix on and off.
Details on configuring the matrix settings and hardware.
Explains the function of dip switches and jumpers for configuration.
Describes the purpose of each dip switch on SW1.
Guide to configuring communication protocols for keyboards.
Specifies the function of each pin on the DB15 connector.
How to connect alarm inputs, relays, and external reset.
Warning about energizing alarm contacts and proper configuration.
Programming and using automatic video input switching.
How the matrix handles alarm inputs and events.
Defines alarm contact configurations (N.O., N.C., Not Used).
Defines actions to be taken when an alarm occurs.
How to transmit telemetry data over coaxial cable.
Instructions on how to access the OSM programming mode.
Details operations of Monitor, SHIFT, ENTER, CLEAR, Numeric, INC/DEC, and SEQ keys.
General| Brand | Videotec |
|---|---|
| Model | SM82A |
| Category | Matrix Switcher |
| Language | English |
To Next Page