Videx 25H/SP/DDA/2W User Manual

25H/SP/DDA/2W - TECHNICAL MANUAL EN-UK - V.1.2 - 04/01/16
12
VIDEX
25H/SP/DDA/2W (1 way “2 wire” DDA audio intercom kit)
Art. UIM-138
User information module
Made in Italy
USB 0V A0 I1 I2 I3 I4 I5
Up Down High Low
96mm
80mm
40mm
32mm
60mm
Auxiliary Output Modes
The UIM-138 module has a single programmable auxiliary output. The table below shows the operating
modes available for this output and is set using the PC software.
Mode AO (Auxiliary Output)
1 Auxiliary output triggered by auxiliary input I2
2 Auxiliary output triggered for duration of call
3 Auxiliary output triggered for auxiliary output time at beginning of call
4 - 10 currently unavailable, left for future expansion
Art.UIM-138 Display Module Dimensions
Terminal Connections
Connection Description
0V 0V ground input
AO Programmable auxiliary output (this is an open collector output, switched 0V. Please refer
to the table above for full list of programmable output modes).
I1 - I5 5 programmable auxiliary inputs, switched 0V trigger (please refer to the table on page 9
for full list of programmable input modes).
Technical Specications
Input Voltage : 12-14Vdc +/- 10%
Current (standby) : approx. 29mA
Current (during operation) : approx. 34mA (max.)
Harness Connection : 5 way pin connector
USB port : USB
Module Dimensions : 80mm (L) x 60mm (W) x 32mm (D)
Working Temp. : -10 +50
o
C

Videx 25H/SP/DDA/2W Specifications

General

Brand	Videx
Model	25H/SP/DDA/2W
Category	Intercom System
Language	English