66250203 - V4.4 - 15/05/22
- 9 -
4000 Series Vandal Resistant Range
Art.4212 - Installation instructions
Art.4212 Audio/video digital front panel Programming
BST/GMT ENABLE/DISABLE
Enable or disable BST/GMT automatic Summer/Winter time
adjustment.
Modify routine
• press “3” to enter edit mode;
• in edit mode, press “3” to enable or disable the facility;
• press
to save or to exit edit mode without saving.
DATE FORMAT
It changes the date format shown on the home page.
The date can either be in EU (dd/mm/yy) or US (mm/dd/yy) format.
Modify routine
1. press “2” to enter the date menu;
2. press again “1” to enter into edit mode;
3. press “1” to switch from EU to US and viceversa;
4. press
to save or to exit edit mode without saving.
DATE
Set the date in the call panel.
Modify routine
• press “2” to enter the date menu;
• press “2” to enter edit mode;
• rst eld will be day when in EU format or month when in US
format. All elds are two digits. After entering the two digit
number it will automatically advance to the next eld;
• after setting the last parameter time will be saved.
DAY
Set the day of the week.
Modify routine
• press “3” to enter edit mode;
• in edit mode, press “3” repeatedly to scroll through the days;
• press
to save or to exit edit mode without saving.
TRADE ENABLE
Enables the trade facility working in conjunctions with the trade
start and trade end time band and the TRD connection terminal.
When the TRD connection is shorted to 0V or the time is within
the trade time band setting it is possible for a user to type in the
trade code to open the door.
Modify routine
• press “3” to enter the trade menu;
• press “1” to enter edit mode;
• press “1” to enable or disable the facility;
• press
to save or to exit edit mode without saving.
TRADE START TRADE END
The beginning and end times of the trade time band.
Modify routine
• press “3” to enter the trade menu;
• press “2” or “3” to enter edit mode;
• enter the hour, minutes and seconds (all elds are composed
of two digits). After entering two digits it will automatically
advance to the next eld. FORMAT is 12 hour then then you
will be able to enter AM or PM after the seconds eld.
• After setting the last parameter the time will be saved.
RELAY TIME
This parameter species how long the relay remains energised
when the activated.
Modify routine
• press “4” to enter edit mode;
• edit relay time: it must be between “1“ and “255”;
• press
to save or to delete characters or exit edit mode
without saving.
SPEECH TIME
This parameter species the maximum speak duration. From 1
to 255 seconds”.
Modify routine
• press “5” to enter edit mode;
• edit relay time: it must be between “1“ and “255”;
• press
to save or to delete characters or exit edit mode
without saving.