What to do if it's not possible to open the door during Videx Intercom System conversation?
If you can't open the door during a conversation on your Videx Intercom System, the problem might be due to a cable size that is too small. To fix this, increase the cable size or use two wires for each signal.
How to fix Videx Intercom System when door station doesn't call extension?
If your Videx Intercom System's door station isn't calling the extension and the bell LED is on for 2 seconds, the issue could stem from several causes: * Incorrect wiring between the door station and videophone: Check the 6 common wire connections, especially wire “1” (speech line/data). * Insufficient cable size: Increase cable size or double up using two wires for each connection. * Incorrectly programmed videophone address: Verify the videophone address on the dip-switches. * Address change without system reboot: Power down the system and then power it up again to detect the new videophone address.
What to do if local call does not work on Videx Intercom System?
If local calls are not working on your Videx Intercom System, it could be due to a wrong connection or a broken call button. To resolve this, check the connection or replace the button.
Why is the intercommunicating call not working on my Videx Intercom System?
If the intercommunicating call feature is not working on your Videx Intercom System, it could be because the ”Key” button was pressed a number of times different from the videophone address value. To solve this, check the address of the videophone you are calling and try again, pressing the “Key” button the correct number of times.
General| Brand | Videx |
|---|---|
| Model | 6256 Series |
| Category | Intercom System |
| Language | English |
To Next Page
