Videx VR4KGSM-1 - Page 47

66250675-EN - V1.0 - 05/09/17
47
4000 Series Vandal Resistant GSM - Technical Manual
4000 Series Vandal Resistant GSM Audio Intercom with Proximity Facility
Programming the GSM Intercom
1111FOBnnn? Query the fob/card stored in memory location nnn and send a conrmation text back to
the sender with the stored fob/card details.
The following examples show how to program each fob/card type:
Example 1: Programming a 955/T or 955/C with no site code, a 5 digit user code of 12345 and storing it in memory location 001, the
following text can be sent to the GSM intercom:
1111FOB001”0”,”12345”
(for these fob/card types a ‘0’ must be inserted for the “site” code).
Example 2: Programming a PBX1E or PBX2 with a 3 digit site code of 123, a 5 digit user code of 45678 and storing it in memory
location 010, the following text can be sent to the GSM intercom:
1111FOB010”123”,”45678”
FIND A TELEPHONE NUMBER FDT
The nd a telephone number feature allows the user to nd the dial to open location (between 000 - 999) of where a particular
telephone number is stored in the GSM intercom. It can locate the number either from using the full telephone number or a
minimum of the last 4 digits of a number (see following examples). The following text messages can be used.
1111FDT”yyyyyyyyyyy”? Find dial to open location of telephone number yyyyyyyyyyy stored, where yyyyyyyyyyy
= telephone number (minimum of 4 digits).
Example 1: Find dial to open location of the telephone number using the full number 01234567890, the following text can be
sent to the GSM intercom:
1111FDT”01234567890”?
The GSM intercom will reply with the following text:
STORED IN nnn
OK
VIDEX GSM
(where nnn = the dial to open location of where the number is stored).
Example 2: Find dial to open location of the telephone number using the last 4 digits of the number 4567, the following text can
be sent to the GSM intercom:
1111FDT”4567”?
The GSM intercom will reply with the following text:
STORED IN nnn
OK
VIDEX GSM
(where nnn = the dial to open location of where the number is stored).
FIND A FOB OR CARD FDF
The nd a fob or card feature allows the user to search and nd the fob/card location (between 000 - 999) of where a proximity fob
or card is stored in the GSM intercom. It locates the fob or card using the 5 digit user code printed on the fob (see the following
example). The following text message can be used.
1111FDF”nnnnn”? Find the fob/card location with user code nnnnn, where nnnnn = user code (5 digit user
code printed on fob/card).
Example: Find fob/card location of card no. 12345, the following text can be sent to the GSM intercom:
1111FDF”12345”?
The GSM intercom will reply with the following text:
STORED IN nnn
OK
VIDEX GSM
(where nnn = the fob/card location of where the fob/card is stored).