15
6167 818 - 10
Vitodens 100-W, B1HE/B1KE Combi Installation/Service
Installation
Mounting the Boiler and Making Connections
(continued)
Note: Various installation components can be found
installation fittings kit. Keep the installation
components safe, as they will be required for
later installation.
Note: To prevent dirt from entering the connections:
Do not remove the protective caps until you are
about to fit the boiler.
1. Mount the boiler on the wall mounting bracket.
Ensure that all four mounting tabs of the wall
mountng bracket have locked into the boiler.
2. Remove plastic shipping caps from the boiler
connections.
3. Remove the wooden blocks from the bottom rails
of the boiler.
To Next Page
Loading...
Need help?
General