EasyManua.ls Logo

Viessmann B2HAH13 - User Manual

Viessmann B2HAH13
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Please file in Service Binder
5461 885 - 04 01/2019
Operating Instructions
VITODENS
r
200-W/222-F
With Vitotronic 200 HO1B Controls
Read and save these instructions
for future reference.
Product may not be exactly as shown
IMPORTANT
H
Do not store or use gasoline or other
ammable liquids in the vicinity of this
or any other appliance.
WHAT TO DO IF YOU SMELL GAS
Do not try to light any appliances.
Do not touch any electrical switches,
do not use any phone in your building.
Immediately call your gas supplier
from a neighbor’s phone. Follow
the gas supplier’s instructions.
If you cannot reach your gas supplier,
call the re department.
Installation and service must be
performed by a quali ed installer,
service agency or the gas supplier.
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or loss of life.
WARNING
Improper installation, adjustment, and/
or operation could cause carbon monoxide
poisoning resulting in injury or loss of life.
This product must be installed and serviced
by a professional service technician who is
experienced and qualified in hot water boiler
installation and gas combustion.
WARNING
Vitodens 200-W, B2HA and B2HB
Models 19 to 150, 68 to 530
Wall-mounted, gas-fired condensing boiler
For operation with natural gas and liquid propane gas
Heating input: 12 to 530 MBH
3.5 to 155 kW
Vitodens 222-F B2TA and B2TB
Models 19, 35, 68, 125
Floor-mounted, gas-fired condensing storage combi boiler
For operation with natural gas and liquid propane gas
Heating input: 12 to 125 MBH
3.5 to 37 kW

Table of Contents

Questions and Answers

  • K
    Kathy NewmanSep 18, 2025
    Why is my Viessmann B2HAH13 Boiler showing error code A8?
    • H
      Heidi SwansonSep 18, 2025
      If your Viessmann Boiler is showing error code A8, it indicates an air lock in the internal circulation pump or that the minimum flow rate is not achieved. If the fault message continues to be displayed, vent the system.
  • C
    Charles HernandezSep 18, 2025
    What does error code b1 mean on a Viessmann B2HAH13?
    • R
      rachelodomSep 18, 2025
      If your Viessmann Boiler displays error code b1, it means there is a communication error with the programming unit. Check the connections and replace the programming unit, if required.
  • B
    Blake McintyreSep 19, 2025
    What does error code A9 mean on my Viessmann Boiler?
    • K
      Kelly GomezSep 22, 2025
      If your Viessmann Boiler displays error code A9, it indicates that the internal circulation pump is blocked. To resolve this, check the circulation pump.
  • R
    Richard LongSep 22, 2025
    What should I do if my Viessmann B2HAH13 shows error code b7?
    • R
      rlopezSep 22, 2025
      If your Viessmann Boiler shows error code b7, it indicates a boiler coding card fault. To fix this, plug in the boiler coding card or replace it if it is faulty.
  • C
    Christine CurtisSep 22, 2025
    What to do if my Viessmann B2HAH13 Boiler displays error code bA?
    • M
      Michael LeSep 22, 2025
      If your Viessmann Boiler displays error code bA, it indicates a communication error with the extension kit for heating circuit 2 (with mixer). To resolve this, check the extension kit connections and code.
  • L
    Lisa AndradeSep 22, 2025
    What does error code Ed mean on a Viessmann B2HAH13?
    • H
      hgillSep 22, 2025
      If your Viessmann Boiler displays error code Ed, it indicates an internal fault. To resolve this, replace the control unit.
  • M
    marquezcynthiaSep 22, 2025
    What does error code F0 mean on a Viessmann B2HAH13 Boiler?
    • T
      Thomas OwensSep 22, 2025
      If your Viessmann Boiler displays error code F0, it indicates an internal fault. To resolve this, replace the control unit.
  • Z
    Zachary JonesSep 22, 2025
    What does error code b4 mean on my Viessmann Boiler?
    • C
      Catherine McgeeSep 23, 2025
      If your Viessmann Boiler displays error code b4, it indicates an internal fault. To fix this, replace the control unit.
  • K
    Kenneth CarneySep 23, 2025
    What does error code b5 mean on my Viessmann B2HAH13?
    • N
      nnavarroSep 23, 2025
      If your Viessmann Boiler displays error code b5, it indicates an internal fault. To fix this, replace the control unit.
  • D
    David LeeSep 23, 2025
    What causes error code C4 on a Viessmann B2HAH13 Boiler?
    • R
      Reginald WilsonSep 23, 2025
      If your Viessmann Boiler displays error code C4, it indicates a communication error with the Open Therm extension. To resolve this, check the Open Therm extension.

Viessmann B2HAH13 Specifications

General IconGeneral
ModelB2HAH13
CategoryBoiler
Fuel TypeNatural Gas / Propane
Efficiency95%
AFUE95%
Warranty10 years
Gas Connection Size3/4 inch
Water Connection Size1 inch

Related product manuals