• Please check regularly if there are
any damages to the cabinet or to the
cables. Newer use obviously
damaged parts and never try to
repair them yourself.
• The display is a very sensitive com-
ponent. Never rest on it. Don’t touch
it with any hard or sharp pointer.
• If necessary clean up the
Commander only with a soft cloth
wet with folk and without uffs.
Never use household cleaners, they
may corrode the surface.
• Please ensure that there is enough
ventilation for the power supply and
the Commander. The installation in
a closed compartment or drawer will
lead to a dangerous overheating
and re risk.
• The environment of the
Commander must be rain proofed,
dry, dust-free and not exposed to
direct solar radiation. Please avoid
any great variations in temperature
• Taking the Commander from cold to
warm rooms, the device needs at
least 1 hour of acclimatisation.
Intention of the
operating instruction
The Commander is intended for an
intuitive operating. To allow a quick start
we intentionally made this operating
instruction short. But the digital model rail-
way is a complex theme. For detailed infor-
mation please look at the included DVD.
The DVD contains a multimedia
instruction. You can play it on a DVD-
player or on your PC. Choose the terms of
reference you want (e. g. drawing a track
diagram). Step by step a movie will show
you what to do. Additionally the DVD
includes this short operating instruction as
a PDF-document and software programs
(computer programs) for the Commander.
Explication of the symbols
Most of the control commands of the
Commander are entered by touch elds on
the display. You will nd the most important
touch eld symbols and a schematic over-
view of the menus on the inside of the
folding backside-cover from this booklet.
To Next Page
Loading...
