6
Installation, service and operating instructions that are
included with the products and are available online
must be observed.
Use Vitoconnect products exclusively for monitoring,
operating and optimising systems with the user interfa-
ces and communication interfaces specified for this
purpose in the relevant printed documentation. With
regard to the communication interfaces, ensure on site
that the system requirements specified in the product
documentation are met at all times for every transfer
medium employed (e.g. required WiFi connection to a
WiFi router).
Only use the specified components for the power sup-
ply (e.g. plug-in power supply units).
Note
The devices are intended exclusively for domestic or
semi-domestic use, i.e. even users who have not had
any instruction are able to operate the devices safely.
Product information
Vitoconnect is a wall mounted internet interface for
communication with the boiler control unit of the heat
generator.
The Vitoconnect 100, type OPTO1 can be used for sin-
gle boiler systems with an Optolink interface.
Vitoconnect enables remote control of heating systems
via the internet. Settings and scanning are carried out
via the ViCare app. Alternatively, remote control of the
heating system by the contractor is carried out via Vito-
guide.
Data connections with Vitoconnect 100, type OPTO1
Only in conjunction with heat generators with an Opto-
link interface
Fig. 1
A
Heat generator with control unit
B
Optolink connection line
C
Vitoconnect 100
D
WiFi
E
Wireless router (on site)
F
Secure internet connection to the Viessmann
server: See www.viessmann.com/vitoconnect.
G
Viessmann server
H
Mobile network
or
WiFi connection
K
Web-enabled control device
Spare parts lists
Information about spare parts can be found on the
Viessmann spare parts app.
Introductory information
Intended use (cont.)
5785665
Information
To Next Page
Loading...
