9
Range reduction:
■
On their way between transmitter and receiver, WiFi
signals are damped, e.g. by air or when penetrating
walls.
■
WiFi signals are reflected by metallic objects, e.g.
reinforcements in walls, metal foil of thermal insula-
tion and thermal glazing with metallised thermal
vapour deposit.
■
WiFi signals are isolated by service ducts and lift
shafts.
■
WiFi signals are disrupted by devices that also
operate with high frequency signals. Maintain a dis-
tance of at least 2 m from these devices:
–
Computers
–
Audio and video systems
–
Radio signals
–
Electronic transformers
–
Pre-ballasts
Note
To ensure a good WiFi connection, we recommend
keeping the distance between the Vitoconnect 100 and
the wireless router as short as possible.
Preparing for installation
Installation location (cont.)
5785665
Installation
To Next Page
Loading...
