Pre-plumbing jig
Includes fixing parts, valves/fittings,
gas tap and valve/fittings cover
Included with 200-W as part of the
standard delivery
Rear pipework mounting frame
Includes pipe tails and fittings cover.
Valves and fittings as well as gas tap are
already supplied with the boiler
Valve/fittings cover
Toolset
A range of Vitoset accessories is available to make Vitodens boiler installations easier.
These include a pre-plumbing jig and a rear pipework mounting frame, where pipework
can run vertically behind the boiler.
Product description Output Part no.
Vitodens 100-W Combi 26 kW 7262166
Vitodens 100-W Combi 30 kW - 35 kW 7262167
Vitodens 100-W System 26 kW 7262163
Vitodens 100-W System 30 kW - 35 kW 7262168
Product description Output Part no.
Vitodens 100-W Combi & System 26 kW 7193965
Vitodens 100-W Combi & System 30 kW - 35 kW 7296418
Vitodens 200-W Combi & System 19 kW - 35 kW 7197599
Product description Output Part no.
Vitodens 100-W Combi & System 26 kW 7299294
Vitodens 100-W Combi & System 30 kW - 35 kW 7299418
Product description Part no.
Case for all tools required for maintenance and service of all Viessmann Vitodens boilers 9537070
18/19
To Next Page