Cylinders
Warranty
25 year warranty on the 200-V and 200-B
stainless steel vessel against perforation
Standard 2 year warranty on all other
parts, e.g. 300-V and 300-B, thermal
controls, valves, electrical components, etc
The Vitocell range from Viessmann offers the right domestic hot water cylinder for
every demand, ideally matched to the heat source.
Application guide
Hot water demand Bedrooms Cylinder size (litres)
1 Bathroom or shower 1 90
1 Bathroom with shower 2 - 3 120
1 Bathroom with shower 3 - 4 150
1 Bathroom with 2 showers 3 - 4 150 - 180
2 Bathrooms and separate shower 4 - 5 210
3 Bathrooms and separate shower 4 - 5 250
3 Bathrooms with 2 separate showers > 5 300
System technology
2 year comprehensive warranty as standard
25 year warranty on 200 range stainless steel vessel
Unique G3 application
Vitodens System boilers up to 35 kW
fitted to a 4-pipe hydraulic system,
installed with a Vitocell 200 or 300
cylinder do not require an energy cut-off
valve and cylinder overheat thermostat
Instead a cylinder sensor takes over the
DHW temperature control (sensor
part no. 7179114)
The energy cut-off valve and cylinder
overheat thermostat are now standard in
the Vitodens boiler
No Part P requirements saves valuable
installation time (up to 1 hour)
Vitodens boilers adjust the cylinder
temperature and the boiler flow
temperature is optimised to the set
DHW temperature, giving improved
system efficiency
To Next Page
Loading...
