BOILER ACCESSORIES
Condensate pump
Technical data
Supply voltage 100 - 240 Volt
Power consumption P1 25 Watt
Current draw 0.2 - 0.1 A
Protention class IP 44/Class F
Acid resitance pH2 or higher
Pump Electronically commutated spherical motor with permanent magnet rotor/impeller
Max. pump head 54 kPa
Max. flow rate 460 I/h
Noise level (Lw) 46 (dB(a))
Max. system temperature +60°C
Min. ambient temperature non-freezing
Safety contact Relay open when triggered, capacity 250 VA
Tank volume 0.7I (usable volume 0.5I)
Package dimensions 215 x 215 x 180 mm
Package weight 1.6 kg
Part no. 7374796
Installation
accessories
Vitodens 100-W
Vitodens 200-W
Vitodens 222-F/242-F
The condensate pump is required for low level
boiler installation where the condensate for
removal has to be pumped upwards.
The condensate pump is also equipped with
an alarm switch (potential free contact) which
can be used to switch off the condensing
boiler/ASHP to prevent the condensate
tank from overflowing. Separate alarm LED
indicators are also fitted to the pump.
To Next Page