VITODENS 100-W COMBI
The Vitodens 100-W high efficiency
gas condensing boiler, manufactured by
Viessmann in Germany, is loaded with
features for easy installation, high efficiency
and impressive fuel savings.
MatriX cylinder burner
Patented technology, manufactured
by Viessmann
Inox-Radial heat exchanger
Excellent corrosion resistance
Self-cleaning
Counteracts dirt and sludge deposits
10 year warranty against corrosion
Integral Grundfos AquaBloc hydraulic unit
For easy service and maintenance
Take advantage of these benefits
Heating circuit pump and integral
expansion vessel
For natural gas and LPG (conversion kit
part no. 7828769)
Permissible boiler operating pressure 3 bar
SEDBUK (2005) seasonal efficiency 90%
Modulation ratio of 1:3, e.g. 9 kW to 26 kW
Room thermostatic and weather
compensated control unit options
DHW flow rate of up to 14 l/min
Pre-heat facility for better hot
water comfort
Comprehensive flue options
Easy installation
Safety valves and fittings
Fully assembled and wired
Boiler flue connection
Hydraulic accessories
Gas tap
Installation aids are available such as
pre-plumbing jig and rear-piping frames,
please see boiler accessories
DHW output range
Boilers within the range offer the following
outputs of 26 kW, 30 kW, 35 kW
Controls
User control interface with large LCD
Plug in controls for wireless operation
Optional weather compensation control
for additional gas savings of up to 12%
Warranty
5 year comprehensive warranty
as standard
10 year warranty on the Inox-Radial
heat exchanger
Wall mounted gas fired condensing boiler, with modulating MatriX cylinder burner
and Inox-Radial heat exchanger, for open and balanced flue operation with integral
expansion vessel.
To Next Page
Loading...
