2
Safety, installation and warranty requirements
Please ensure that this manual is read and understood before commencing installation. Failure to comply with the issues listed be-
low and details printed in this manual can cause product/property damage, severe personal injury, and/or loss of life. Ensure all
requirements below are understood and fulfilled (including detailed information found in manual subsections).
H Licensed professional heating
contractor
The installation, adjustment, service,
and maintenance of this equipment
must be performed by a licensed pro-
fessional heating contractor.
"
Please see sections
entitled “Safety” and
“Important Regulatory and
Installation Requirements”
in the Installation and
Start-up/Service Instructions.
H Product documentation
Read all applicable documentation be-
fore commencing installation. Store
documentation near boiler in a readily
accessible location for reference in the
future by service personnel.
"
For a listing of applicable
literature, please see
section entitled “Important
Regulatory and Installation
Requirements”
in the Installation and
Start-up/Service Instructions.
H Advice to owner
Once the installation work is complete,
the heating contractor must familiarize
the system operator/ultimate owner
with all equipment, as well as safety
precautions/requirements, shutdown
procedure, and the need for profession-
al service annually before the heating
season begins.
H Warranty
Information contained in this and re-
lated product documentation must be
read and followed. Failure to do so ren-
ders warranty null and void.
5285 565 v1.3
To Next Page
Loading...
