Screw type1 x 5pcs
Screw type2 x 5pcs
Getting Started
2
Installing the Display
Installing the Stand
Place the display face down on a protective surface. Afterwards attach the neck piece onto the display
and screw in the 5 screws to secure the neck. then insert the neck onto the bottom stand and secure
the parts by inserting the screws and tightening them with the screwdriver provied.
Note: Attaching the stand requires two people.
Disconnecting the Stand
To remove the stand, remove the screws in the circled area and the neck will come off.
To Next Page
Loading...
Need help?
General