Using the Display Features
22
Adjusting On-Screen Display (OSD) Settings
1. Press MENU to display the OSD main menu.
2. Press ◄ or ► to select the main menu, then press ENTER to enter the selected menu.
3. Press ▲ or ▼ to select the menu item, then press ◄ or ► to adjust or select the setting.
When selecting a menu item with a submenu (
► ►), press ► or ENTER to enter its submenu.
(“► ►” will only appear when the menu item is highlighted)
4. Press MENU to return to the previous menu or press EXIT to exit the menu.
Picture Menu
PICTURE SETTINGSPICTURE SETTINGS
Picture Mode Standard
Brightness
Contrast
Saturation
Hue
Sharpness
:Return :Move
MEN UMEN U
:Change Setting
PICTUREPICTURE
Picture Settings
Screen Size Wide
PC Settings
Color Temperature Normal
Backlight High
Advanced Picture Settings
:Return :Move :Go to Next Menu
MEN UMEN U ENT ERENT ER
PICTURE SOUND PARENTAL SETUP OTHERS
PC SET TINGSPC SET TINGS
Auto Adjust Execute
Horizontal Position
Vertical Position
Clock
Phase
Reset Execute
:Return :Move :Press to Execute
MEN UMEN U ENT ERENT ER
Menu item Description
Picture Settings
Apply a preset picture mode optimized for different
viewing conditions (Standard / Movie / User /
Power Saving / Dynamic).
* If Picture Settings is set to User, you can adjust
the following settings:
Brightness• : Adjust the brightness setting.
Contrast• : Adjust the difference between the
light and dark levels in the picture.
Saturation• : Adjust the color detail of images.
Hue• : Adjust the picture hue.
Sharpness• : Adjust the sharpness of the edges
of elements in the picture.
Screen Size
Select the aspect ratio of the display (Zoom /
Normal / Wide / Cinema / Full 100%).
* For Full 100% option, it is only available on
HDMI/DVI input source.
PC Settings
(only available
on VGA source)
Adjust the PC display settings.
Auto Adjust• : Synchronize the display
automatically.
Horizontal Position• : Move the screen position
horizontally.
Vertical Position• : Move the screen position
vertically.
Clock• : Adjust delay time of clock in order to
reduce the noise of picture.
Phase• : Adjust delay time of phase in order to
reduce the noise of picture.
Reset• : Reset to the default settings.
Color
Temperature
Apply a preset color temperature setting (Normal /
Warm / Cool).