Other Information
32
Mute 8 s 6 36 000: OFF
001: ON (mute)
Button lock 8 s 8 38 000: Unlock
001: Lock
Menu lock 8 s > 3E 000: Unlock
001: Lock
Number 8 s @ 40 000~009
Key Pad 8 s A 41 000: UP
001: DOWN
002: LEFT
003: RIGHT
004: ENTER
005: INPUT
006: MENU/EXIT
Remote
Control
8 s B 42 000: Disable
001: Enable
002: Pass through
Disable: RCU has no
effect on HDTV.
Enabled: RCU
controls the HDTV.
This is the power up
default on the HDTV.
Pass through: RCU
has no effect on
HDTV and all RCU
command codes are
transmitted to FC via
the RS232 port.
Restore
default
8 s ~ 7E 000 Resets HDTV to
factory setting
[NOTE]
1. Behavior at lock modes
Lock Mode Behavior
Button Lock 1. Lock all buttons of front panel and RCU, except for “Power”
2. All the SET functions should be workable via RS32, even the ones with
according hot key in RCU like Mute,…etc.
MENU Lock 1. Lock “MENU’ key of front panel and RCU
2. The Factory and Hospitality modes should not be blocked for the model
using MENU-combined key to enter these two modes. Alternative approach
will be indicated separately if any limitation by model.
To Next Page
Loading...
