ViewSonic PA503HD - Page 51

51
Menu Descripon
Advanced
Direct Power On
Automacally power on the projector when AC power
is supplied, without pressing the Power buon on the
projector or the remote control.
Auto Power O
A countdown mer will start when there is no signal being
sent to the projector. The projector will automacally power
o when the countdown has nished (in minutes).
Signal Power On
Automacally power on the projector when a signal is
detected from the input source, without pressing the Power
buon on the projector or on the remote control.
NOTE: The projector will not power on automacally
by HDMI if there is one HDMI cable already
connected.
Exit
Exit the Advanced menu.
Lamp Sengs
Lamp Hour
Displays the lamp hours of the current lamp.
Lamp Reminder
Show or to hide a warning message when the “change lamp
message” is displayed.
Brightness Mode
Opon Descripon
Bright
Highest brightness and power
consumpon.
Eco
Dim the light output, lowering
power consumpon.
Dynamic
Automacally adjust the picture
brightness in order to give opmum
contrast performance.
Lamp Reset
Resets the Lamp Hour counter. Should be used aer
replacing the lamp.
Exit
Exit Lamp Sengs.