53
Select the aspect rao of the projected image.
Scales an image so that it is displayed
in the center of the screen with a 4:3
aspect rao. This is most suitable for
4:3 images like computer monitors,
standard denion TV, and 4:3
aspect DVD movies, as it displays
them without aspect alteraon.
Scales an image so that it is displayed
in the center of the screen with
a 16:9 aspect rao. This is most
suitable for images which are already
in a 16:9 aspect, like high denion
TV.
Projects the image as its original
resoluon and resizes it to t within
the display area. For input signals
with lower resoluons, the projected
image will be displayed in its original
size.
Scales an image proporonally to t
the projector’s nave resoluon in its
horizontal width. This is suitable for
the incoming image which is neither
4:3 nor 16:9 and you want to make
the most use of the screen without
altering the image’s aspect rao.
Scales an image so that it is displayed
in the center of the screen with
a 16:10 aspect rao. This is most
suitable for images which are already
in a 16:10 aspect.
LBX
For non-16:9 leerbox source and
if you use an external 16:9 lens to
display 2.35:1 aspect rao in full
resoluon.
Remove the video encoding noise on the edge of the video
source.
Reduce or magnify the projected image.
Adjust the projected image horizontally or vercally.
Adjust image distoron vercally.
Automacally correct the keystone.
WXGA models
To Next Page
Loading...
Need help?
General
Weight and Dimensions
