ViewSonic PJ506D User Manual

12ViewSonic PJ506D
Remote Control
1. Power
Refer to “Powering On/Off the Projector”.
2. Four direction buttons
The four direction buttons /// can
be used to scroll through OSD (On-Screen
Display) menus and make adjustments.
3. Menu
Press the Menu button to activate the OSD
(On-Screen Display) menu. Use the directional
buttons and Menu button to navigate through
the OSD (On-Screen Display) menu.
4. Enter
Conrms the selection
5. Keystone  /
Adjusts image distortion caused by tilting the
projector.
6. Volume  /
Press the Volume  button to increase the
volume; press the Volume  button to reduce
the volume.
7. Source
Manually selects an input source.
8. Mute
Cuts off the sound temporarily.
9. Blank
Cuts off the screen temporarily.
10. 4:3/16:9
Press the 4:3/16:9 to switch the image aspect ratio from 4:3 to 16:9.
11. Auto
Automatically adjusts frequency and phase.
POWER
MUTE
4:3/16:9 KEYSTONE
LASER
ENTER BLANK
MENU
VOLUME
AUTO SOURCE
1
2
3
4
7
6
5
8
9
10
11

ViewSonic PJ506D Specifications

General

Native resolution	SVGA (800x600) pixels
Service life of lamp	3000 h
Bulb power	200 W
Power consumption (typical)	250 W
Input type	NTSC M, NTSC 4.43, PAL, SECAM, HDTV

Weight and Dimensions

Weight	5.7 g
Dimensions (WxDxH)	256 x 223 x 102 mm