ViewSonic PJ506D User Manual

28ViewSonic PJ506D
Specications
Display Type Single 0.55” DLP panel
Resolution (Pixels) 800 x 600
Lens Manual Zoom (1.1X)
Aspect Ratio Auto, 16:9, 4:3
Screen Size 25” - 285” (Diagonal)
Lamp 200W
Projection Type Front, Rear, Ceiling
Video Compatibility NTSC4.43
PAL-60, PAL-M,N,(B,D,G,H,I )
SECAM
Input Source D-Sub 15 pin, S-Video, Composite Video, Stereo
Phone Jack, RS232, USB
Scanning Frequency
Horizontal Frequency 31 - 79 KHz
Vertical Frequency 56 - 85 Hz
Digital Keystone Correction Vertical + / - 15°
Integrated Speaker 1 x 1W
Remote Control Multifunctional
OSD Language Multilanguage
Storage Temperature -20 - + 60°C
Operation Temperature 0 - + 40°C
Operation Humidity 30% - 85% maximum
Power Requirement AC 100 – 240V, 50 / 60 Hz
Power Consumption 250W (Typical)
Dimension (W x D x H) 255.5 x 223 x 101.5
Weight 2.7 kgs (5.9 lbs)
Note: Design and Specications are subject to change without prior notice.

ViewSonic PJ506D Specifications

General

Native resolution	SVGA (800x600) pixels
Service life of lamp	3000 h
Bulb power	200 W
Power consumption (typical)	250 W
Input type	NTSC M, NTSC 4.43, PAL, SECAM, HDTV

Weight and Dimensions

Weight	5.7 g
Dimensions (WxDxH)	256 x 223 x 102 mm