ViewSonic PJ506D User Manual

ViewSonic PJ506D29
Appendix
LED Indicator Messages
Projector
Status
Standby
Lamp
ignition
failure
Power on
Lamp life
warning
Power off
Over
temperature
LED Type
Power LED Lamp LED
Color Status Color Status
Meaning
Green
Amber
Amber
-
-
-
Flashing
Solid
Solid
-
-
-
-
-
Green
Amber
Green
Amber
-
-
Solid
Solid
Flashing
Flashing
The projector is powered and ready.
The projector system has some
problems with its fan, so the
projector cannot start up.
The projector is in good condition
and is projecting at maximum
brightness.
The lamp has reached its end of life
and must be changed soon. The
lamp will continue to operate until it
fails. Change the lamp. If the lamp
is off, then the ballast will become
malfunction.
The projector is shutting down. The
fan motor is cooling the lamp for
shutdown. Do not unplug the power
cord or turn the power switch off
before the lamp LED turns off. The
fan motor will turn off when the lamp
has cooled.
Temperature is too high. The lamp
will turn off.

ViewSonic PJ506D Specifications

General

Native resolution	SVGA (800x600) pixels
Service life of lamp	3000 h
Bulb power	200 W
Power consumption (typical)	250 W
Input type	NTSC M, NTSC 4.43, PAL, SECAM, HDTV

Weight and Dimensions

Weight	5.7 g
Dimensions (WxDxH)	256 x 223 x 102 mm