ViewSonic PJ506D User Manual

ViewSonic PJ506D23
Red
Manually adjusts red.
Green
Manually adjusts green.
Blue
Manually adjusts blue.
Video (Video Mode)
Saturation
Adjusts a video image from black and white to fully saturated color.
 Press  to decrease the amount of color in the image.
 Press  to increase the amount of color in the image.
Tint
Adjusts the color balance of red and green.
 Press  to increase the amount of green in the image.
 Press  to increase the amount of red in the image.
Sharpness
Adjusts the sharpness of the image.
 Press  to decrease the image.
 Press  to increase the image.
Display (Computer Mode)
Phase
“Phase” synchronizes the signal timing of the display with that of the graphic card. If you
experience an unstable or ickering image, use the phase function to correct it.
Tracking
“Tracking” changes the display data frequency to match the frequency of your
computer graphic card. If you experience a vertical ickering bar, use the tracking
function to make an adjustment.
H.Position (Horizontal Position)
 Press  to move the image left.
 Press  to move the image right.
V.Position (Vertical Position)
 Press  to move the image down.
 Press  to move the image up.

ViewSonic PJ506D Specifications

General

Native resolution	SVGA (800x600) pixels
Service life of lamp	3000 h
Bulb power	200 W
Power consumption (typical)	250 W
Input type	NTSC M, NTSC 4.43, PAL, SECAM, HDTV

Weight and Dimensions

Weight	5.7 g
Dimensions (WxDxH)	256 x 223 x 102 mm