ViewSonic PJ588D User Manual

17 ViewSonic PJ588D/PJ568D/PJ508D
ON-SCREEN DISPLAY MENU SETTINGS
On-Screen Display Menu Controls
The projector has an On-Screen Display (OSD) that lets you make image adjustments and change
various settings.
Navigating the OSD
You can use the remote control or the buttons on the top of the projector to navigate and make
changes to the OSD. The following illustration shows the corresponding buttons on the remote control
and on the projector.
A. To open the OSD, press the Menu but-
ton.
B. There are six menus. Press the cursor
 button to move through the menus.
C. Press the cursor  button to move up
and down in a menu.
D. Press  to change values for settings.
E. Press Menu to close the OSD or leave
a submenu.
Note:
Depending on the video source not all items in the OSD are available. For example, the Horizontal/Verti-
cal
Position items in the Setup menu can only be modied when connected to a PC. Items that are not
available cannot be accessed and are grayed out.
http://www.pureglare.com.au

ViewSonic PJ588D Specifications

General

Brand	ViewSonic
Model	PJ588D
Category	Projector
Language	English