8ViewSonic PJ588D/PJ568D/PJ508D
26.
Enter Enter key when connected through USB to a PC
27.
Power Turn the projector on or off
12
28.
Laser Use as on-screen pointer. DO NOT POINT IN EYES
Remote Control Operating Range
The remote control uses infrared transmission to control the projector. It is not necessary to point the
remote directly at the projector. Provided you are not holding the remote perpendicular to the sides
or the rear of the projector, the remote functions within a radius of about 7 meters (23 feet) and 30
degrees above or below the projector level. If the projector does not respond to the remote control,
move a little closer towards the projector.
Projector and Remote Control Buttons
The projector can be operated using the remote control or the buttons on the top of the projector.
All operations can be carried out with the remote control; however the buttons on the projector are
limited in use. The following illustration shows the corresponding buttons on the remote control and
on the projector.
http://www.pureglare.com.au
To Next Page
Loading...
Need help?
General
