ViewSonic PJ755D 10
Installation
Connecting the Projector
1 . Power Cord
2 . VGA Cable
3 . Composite Video Cable
4 . DVI to D-Sub Cable
5 . S-Video Cable
6 . RCA Component Cable for YPbPr
7 . D-Sub to RCA Cable for HDTV/Component (Optional Accessory)
8 . DVI to DVI Cable (Optional Accessory)
9 . RS232 Cable (Optional Accessory)
* To ensure the projector works well with your computer, please set the display mode of your graphic card less
than or equal to
1024 X 768 resolution. Make sure the timing of the display mode is compatible with the pro-
jector. Refer to the “Compatibility Modes”
section on page 26.
To Next Page
Loading...
