ViewSonic PJ755D 13
Adjusting the Projected Image
Adjusting the Projector Image Height
The projector is equipped with an elevator foot for adjusting the image height.
To raise the image:
1 . Press the elevator button .
2 . Raise the image to the desired height angle , then release the button to lock the elevator foot
into position.
3 . Use to fine-tune the display angle.
To lower the image:
1 . Press the elevator button.
2 . Lower the image, then release the button to lock the elevator foot into position.
3 . Use to fine-tune the display angle.To raise the image:
Tilt Addjusting Wheel
Elevator Foot
Elevator Button
To Next Page
Loading...
