ViewSonic PJ755D 15
User Controls
Control Panel & Remote Control
There are two ways for you to control the functions: Remote Control and Control Panel.
Using the Control Panel
Power/Standby
* Refer to the “Power On/Off the Projector” section on pages 11-12.
Source
* Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV
sources.
Menu
* Press “Menu” to launch the on screen display (OSD) menu. To exit OSD, press “Menu” again.
Keystone
* Adjusts image distortion caused by tilting the projector (±16 degrees).
Four Directional Select Keys
* Use to select items or make adjustments to your selection.
Enter
* Confirm your selection of items.
Re-Sync (Only Analog RGB signal valid)
* Automatically synchronizes the projector to the input source.
Remote Control Control Panel
0
To Next Page
Loading...
