ViewSonic PJ755D User Manual

ViewSonic PJ755D 19
Image-II
Keystone (Keystone Correction)
Adjust image distortion caused by tilting projector. (±16 degrees)
Press OK to adjust
* Vertical keystone: Press the or to adjust image distortion ver-
tically and makes a squarer image.
* Horizontal keystone: Press the or to adjust image distortion
horizontally and makes a squarer image.
Position
Adjust the image position. Press OK to adjust
Vertical Position
* Press the to move the image down.
* Press the to move the image up.
Horizontal Position
* Press the to move the image left.
* Press the to move the image right.
Color Temp.
Adjust the color temperature. At higher temperature, the screen looks colder; at lower temperature, the
screen looks warmer.
Display Format
Use this function to choose your desired aspect ratio.
* Windows: The input source will be compacted in the center with scaling.
* 4:3: The input source will be scaled to fit the projection screen.
* 16:9: The input source will be scaled to fit the width of the screen.
* Letterbox: Letterbox mode zooms a letterboxed image intended for 4:3 display to full screen
wide.
Advance
Press OK to adjust the R (Red), G (Green), or B (Blue) for brightness and contrast.
Reset
Press OK to return the display parameters on all menus to their factory default settings.
* “Position” function is
not supported under
DVI-I source.
Position
Colour temp.
Display format
Advance
Reset
Language
Image - I
Management PIP
Image - II Audio
Keystone
Press OK to adjust
Press OK to adjust
Press OK to reset
Press OK to adjust
Position
Colour temp.
Display format
Advance
Reset
Language
Image - I
Management PIP
Image - II Audio
Keystone
Press OK to adjust
Press OK to adjust
Press OK to reset
Press OK to adjust
Vertical keystone
Horizontal keystone
Vertical position
Horizontal position
Original Input The letterbox

ViewSonic PJ755D Specifications

General

Brand	ViewSonic
Model	PJ755D
Category	Projector
Language	English