23
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you
achieve better time management when giving presentations. Follow these steps to
utilize this function:
1. Press Timer on the remote control to access the
Presentation Timer menu or go to the SYSTEM
SETTING: BASIC > Advanced > Presentation Timer
menu and press Enter to display the Presentation
Timer page.
2. Highlight Timer Period and decide the timer period by
pressing / .
3. Press
to highlight Timer Display and choose if you
want the timer to show up on the screen by pressing / .
4. Press to highlight Timer Position and set the timer position by pressing /
.
Top-Left → Bottom-Left → Top-Right → Bottom-Right
5. Press to highlight Timer Counting Direction and select your desired counting
direction by pressing / ..
6. Press to highlight Sound Reminder and select your desired counting direction
by pressing / . If you select On, a double beep sound will be heard at the last
30 seconds of counting down/up, and a triple beep sound will be produced when
the timer is up.
7. To activate the presentation timer, press to highlight Start Counting and select
Yes.
8. To cancel the timer, highlight Start Counting and select No.
Selection Description
Always Displays the timer on screen throughout the presentation time.
1 Min/2 Min/3 Min Displays the timer on screen in the last 1/2/3 minute(s).
Never Hides the timer throughout the presentation time.
Selection Description
Count Up Increases from 0 to the preset time.
Count Down Decrease from the preset time to 0.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
