Name: ViewSonic PJD5155L
Brand: ViewSonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

SYSTEM SETTING: ADVANCED

High Altitude Mode

Use this function to allow the fans operates at full speed continuously to achieve

proper high altitude cooling of the projector.

DCR

DCR (Dynamic Contrast Ratio): Enable DCR will further enhance contrast ratio by

darkening the black scenes. Disable DCR will resume to normal contrast

performance. DCR will impact lamp life and system noise performance.

Audio Settings

Mute

Cuts off the sound temporarily.

Audio Volume

Adjusts the projector’s volume level.

Power On/Off Ring Tone

Setting the sound mute or changing the sound level will not affect the Power On/Off

Ring Tone. The only way to change Power On/Off Ring Tone is setting On or Off here.

Lamp Settings

Lamp Mode

Sets the Lamp Mode.

• Normal: 100% lamp power

• Economic: 80% lamp power

• Dynamic: 30~100% lamp power based on signal

• Sleep Mode: 30% lamp power

Reset Lamp Hours

Reset the lamp Hour to 0 hours.

Lamp Hours

Display the lamp’s elapsed operating time (in hours).

Filter Settings (Optional)

Filter Mode

Use this function to activate filter mode after the projector is installed an optional filter

cover.

Reset Filter Hours

Reset the filter Hour to 0 hours.

Filter Hours

Display the filter’s elapsed operating time (in hours).

Other manuals for ViewSonic PJD5155L

Questions and Answers:

Need help?

Do you have a question about the ViewSonic PJD5155L and is the answer not in the manual?

General