ViewSonic PLED-W600 - Configure Wireless Connection (via Client mode)

28
&RQ¿JXUH:LUHOHVV&RQQHFWLRQYLD&OLHQWPRGH
To access the SmartDisplay on your device via Client mode connection, do the following:
Select [Client Mode]
Enter Home Menu
Select [Settings]
Select [WiFi]
Enter AP Mode Page.
Select [ON] to enable the
function.
Configure the settings.
Then select OK to save the
settings.
Select the device to connect. Be
sure to enable Hotspot function
of your mobile device.
Enter the password. Then select
OK to save the settings.
Plug in the Wi-Fi Dongle
(Wi-Fi dongle is an optional accessory)
S
/
T
/
W
/
X
: Select item
Enter
&RQ¿UP
COLOR
AUDIO
MENU/
EXIT
COLOR
AUDIO
MENU/
EXIT
COLOR
AUDIO
MENU/
EXIT
COLOR
AUDIO
MENU/
EXIT
COLOR
AUDIO
MENU/
EXIT
S
/
T
/
W
/
X
: Select item
Enter
&RQ¿UP