ViewSonic PLED-W600 - Using the Main Menu

33
Using the Main Menu
Refer to the below table for details on menu items.
 Some of the menu options are not available on PLED-W600 projector.
Menu Menu option Description
DISPLAY
Aspect Ratio
Select the aspect ratio of the display.
Available options: AUTO / 4:3 / 16:9 / 16:10
Overscan
Enable overscan display (only for HDMI input signal).
Available options: No / Yes
Digital Zoom
Digitally enlarge the projected image.
Available range: 0 ~ 10
Auto Image
Adjust
Synchronize the display automatically (only for COMPUTER input
signal).
Available options: No / Yes
Manual Image
Adjust
Adjust the PC display settings.
Phase
Adjust to reduce horizontal noise.
Available range: 0 ~ 31
Clock
Adjust to reduce vertical noise.
Available range: -5 ~ 5
H. Position
Move the screen position horizontally.
Available range: -10 ~ 10
V. Position
Move the screen position vertically.
Available range: -10 ~ 10
([LW Return to the DISPLAY submenu.
Color
Temperature
Select the preset color temperature.
Available options: Warm / Normal / Cool
Brilliant Color
Increase the brightness by changing the colors.
Available range: 0~9
PICTURE
Color Mode
Select a preset color mode.
Available options: Brightest / PC / Movie / Dynamic / sRGB
Brightness
Adjust the brightness of the image.
Available range 0 ~ 100
Contrast
Adjust the contrast of the image.
Available range: 0 ~ 100
Sharpness
Adjust the sharpness or softness of the image.
Available range: 0 ~ 31
Saturation
Adjust the color intensity (only for Video input signal).
Available range: 0 ~ 100
Tint
Adjust the balance of the red, green, and blue colors of the image (only
for Video input signal).
Available range: 0 ~ 100
Advanced
Set advanced settings for projected image.
Gamma
Adjust the color gamma differences between the dark
and bright portions of the input signal.
Available range: 0 ~ 7
Color Space
Adjust the color for projected image from a video input
signal.
Available options: AUTO / RGB / YUV
Pattern
Select the pattern type to be displayed on the screen
when there is no input signal.
Available options: Off / 1 / 2 / 3 / 4 / 5
([LW Return to the PICTURE submenu.