ViewSonic PLED-W600 - Page 36

34
Menu Menu option Description
SETTING
Projector
Position
Select the projector position.
Available options: Front Table / Rear Table / Front Ceiling / Rear
Ceiling
Menu Position
Set the display position of the OSD menu.
Available options: Center / Top-Left / Top-Right / Bottom-Left / Bottom-
Right
Auto
Keystone
Automatically adjust the trapezoidal (keystone) distortion of the
projected image.
Available options: Off / On
Manual
Keystone
Manually adjust the trapezoidal (keystone) distortion of the projected
image.
Available range: -40 ~ 40
Volume
Adjust the volume of the built-in speaker.
Available range: 0 ~ 10
Mute
Temporarily turn off the sound.
Available options: Off / On
Audio Mode
Select a preset audio mode.
Available options: Default / Speech / Entertainment
OPTIONS
Language
Set the on-screen display language.
Available options: Arabic / Thai / Turkish / Traditional Chinese /
Swedish /Russian / Korean / Italian / French / Spanish / Español /
English / Deutshland / German
My Button
Specify the shortcut key.
Available options: Projection Position / Brightness / Contrast / Color
Temp / Menu Position / Information
Auto Search
Automatically detects the input signal when the projector is turned on.
Available options: Off / On
Advanced
&RQ¿JXUHRWKHUJHQHUDOVHWWLQJV
Fan Mode
Set the fan speed according to altitude.
Available options: AUTO / High Altitude
Direct Power
On
Turn on the projector power automatically when the
power supply is switched on.
Available options: Off / On
Auto Power
Off
Set the projector to automatically turn off if it is left idle
at the preset time.
Available options: Disable / 5 min / 10 min / 15 min /
20 min / 25 min / 30 min
([LW Return to the OPTIONS submenu.
Reset All
Settings
Reset all settings to the factory default settings.
Available options: No / Yes
Information Display the projector information.