S
Sheri CollinsAug 2, 2025
What to do if my ViewSonic VSD220 has no power?
- CCynthia ChavezAug 2, 2025
If your ViewSonic Monitor has no power, press and hold the power button for at least three seconds. If the LED does not light green with the device booting-up then ensure that the power adaptor is plugged-in to a suitable power socket and that the DC connector is fully inserted into the correct socket on the rear of the device. Check the power socket with another device. If there is still no power then contact ViewSonic support or the Reseller from whom the device was purchased.