ViewSonic VSD220 Quick Start Guide

2
B. Product Overview
Basic Operations and Front View
On / Off / Standby switch
Status LED
• Green light - Power On
• Orange light - Power Saving Mode
• Light off - Power Off
Display with touch panel function
Connect the Smart Display to your PC using the
included USB cable to enable touch functionality when
using the Smart Display as a monitor with external PC.
About LCD display:
This product uses a TFT LCD display. Note that some
pixels may always appear off (black) while some are
always on (orange, green, or blue). Depending on the
viewing angle, uneven color or uneven brightness may be
observed. Please note that these are natural characteristics
of TFT LCD and should not be regarded as defects.
Speaker
Built-in Webcam
Webcam cannot be used when in display mode.
Built-in microphone
Back View
USB Port (host)
External connection port cover
Stand
Remove stand for VESA mounting.
Headphone jack
microUSB port (device)
This USB port does not support USB connection to
devices such as printer, mouse, etc.
DC-in jack
Please do not use AC adapters other than the one
supplied in this product package to prevent re and
electric shock.
Please do not place objects on the AC adapter, or cover it
with anything. Overheating of the AC adapter may lead to
a re.
LAN port (RJ-45)
Card reader slot (microSD/microSDHC)
microHDMI port (device)
For input only. HDMI output not supported.

ViewSonic VSD220 Specifications

General

Processor cores	2
Processor family	-
Processor frequency	1 GHz
Internal memory	1 GB
Maximum internal memory	- GB
Optical drive type	No
Card reader integrated	Yes
Total storage capacity	8 GB
Compatible memory cards	MicroSD (TransFlash)
Megapixel	1.3 MP
Chassis type	All-in-One
Power supply type	AC/DC
Dimensions (WxDxH)	512.8 x 21.9 x 353 mm
USB connector type	Micro-USB A
Storage drive average seek time	5 ms
Display diagonal	21.5 \
Touch technology	Multi-touch
Display brightness	250 cd/m²
Native aspect ratio	16:9
Contrast ratio (typical)	1000:1
RMS rated power	3 W
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	2.1+EDR
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
Product color	Black
Operating system installed	Android 4.0
AC adapter input voltage	100 - 240 V
Power consumption (typical)	40 W
Cables included	AC
Certification	UL/cUL, CE, CB, FCC-B(including ICES003), CCC, Gost-R/Hygienic, China Energy
Sustainability certificates	RoHS

Weight and Dimensions

Package weight	5800 g
Depth (with stand)	21.9 mm
Width (with stand)	512.8 mm
Height (with stand)	353 mm
Weight (with stand)	4800 g