TSGR-21 GAS Release Panel User Manual
Vighnaharta Technologies Pvt. Ltd. Page 31 of 43
4) RAC Abort Tmr:
After entering in the RAC abort Tmr menu, you can set RAC abort Tmr. by default it is 005 Sec.
To change the state press Enter menu and the use up or down key. Make Sure that RAC Abort Tmr is
less than Pre Release Tmr. LCD displays current setting of RAC Abort Tmr.
4) NAC silence Tmr:
After entering in the NAC silence Tmr menu, you can set NAC silence Tmr. by default it is 010
Min. To change the state press Enter menu and the use up or down key. LCD displays current setting of
NAC silence Tmr.
Note: This time is application for all three NAC’s
3.2.6 Factory Reset:
From selecting this menu you can enter below sub menus.
1) Factory Default:
Press Enter to restore all panel settings. After restored all panel settings LCD will display
“Defaults Restored Please ESC”.
2) Clear All Events:
Press Enter to erase all saved events from panel. After erasing all events LCD will display “ No
Events”
To Next Page
Loading...